ReminderApp (Reminder) - User manual

With ReminderApp (Reminder), no more forgetting!
Rest assured, this program is there to remind you of everything that is important thanks to reminders such as (eg: take your medication, don't forget an appointment or someone's visit, with the baby-minder, domestic help, nurse, etc.).
Even birthday reminders!
We've all experienced this embarrassing moment at least once in our lives: forgetting a loved one's birthday! It must be said that it is not always easy to remember the birthday dates of all the people you are used to knowing (especially when you come from a large family or are part of a large group of friends).
You enter the birthday dates of the whole family and the program will remind you of them every year with an alarm, including reminders of a anniversariy!
This program also contains an address book and much more to discover!

To learn more and configure this program Please read this documentation in its entirety. Thanks.

User Guide

• Author: Adriano Barbieri
• Last modified: July 2025

Table of contents

• 1.\ Introduction
• 2.\ Setting up the program
• 3.\ The menus
• 4.\ Additional information for the main window for the option "Reminder for the selected day:"
• 5.\ How does the Address book work?

1.\ Introduction

ReminderApp is a combination of agenda and an address book for NVDA.
This program is very intuitive and does not require much explanation, however I will give you some guidelines to follow.

2.\ Setting up the program

The addon contains the following elements:

• The "Sounds" folder which contains the alarm sound files, you can add them directly to this folder as long as they are in "wav" format, and their duration is less than 2 seconds, ReminderApp will automatically load the names and sort them when will enter in the "Set notifications" configuration option, which means that if you add alarms, the number of alarms you set may change and you will have to reset it in the Settings menu Alt+i submenu and then in the "Set notifications" dialog in the drop-down list called: Use alarm: followed by the name of the alarm.
  There is also a "Samples" folder inside the "Sounds" folder, these sounds are used by the program.

3.\ The menus

In the main window of the program at startup we will find the following five menus with their respective commands.

File Menu Submenu Alt+ f

In this first menu we will have the following options:

Contacts submenu

• Export your contacts... Ctrl+Shift+E
  Press Enter, a dialog box will appear with the title:
  Export Contacts
  Type a new export name if desired in the File Name field
  Then specify txt or json as the file type.
  Type: JSON File (*.json)
  Press the down arrow to find:
  Text File (*.txt)
  Choose the destination from the tree view:
  Finally, save your file by clicking the button: Export File.
  If everything goes well, the following message will appear:
  Warning! Contacts exported successfully!

• Import contacts into your address book... Ctrl+Shift+I
  Press Enter, a dialog box will appear with the title:
  Select a file to import
File Type: JSON File (*.json).
  Press the down arrow to find:
  Text File (*.txt).
  Select the previously exported txt or json file from the tree view.
  Press the button: "Import File."
  If everything goes well, the following message will appear:
  Warning! Import completed successfully!
  Pressing the "Close" button will open a new dialog box titled:
  Choose how to proceed.
Selecting Yes will overwrite the contacts.
Selecting No will only add them to the existing ones.
  Make your choice.

FOR YOUR INFORMATION:
JSON files in this program are structured as a list of data, e.g.,
["...", "...", "..."], and are easier to handle for the program, while text files are structured with a new line marker, e.g.,
line
line
line, etc., which are more human-readable.

Configuration submenu

• Export the configuration folder... Ctrl+E
  Press Enter, a dialog box will appear with the title:
  Choose destination folder
  Select the export location for the ReminderApp_config folder from the tree view:
  Press the down arrow to find:
  Export Folder
  If everything goes well, the following message will appear:
  Warning! Configuration exported successfully!

• Import the configuration folder... Ctrl+I
  Press Enter, a dialog box will appear with the title:
  Choose source folder
  Select the ReminderApp_config folder location from the tree view:
  Press the down arrow to find:
  Import Folder
  If everything goes well, the following message will appear:
  Warning! Configuration imported successfully!

• Close Alt+f4
  This option simply closes the main ReminderApp window and you can reopen it using the combination NVDA+Shift+F2, or the combination you set.

Edit Menu Submenu Alt+ e

In this second menu we will have the following options:

• Create reminder list with expiration date... Ctrl+L
  This function allows you to generate a list of reminders, each associated with an Appointment or Medication type event.
  For each entry, you can set a specific alert date.
  The entire list can be configured to repeat until a final date, applying the repetition to all included reminders.
  When finished, press "Save" to confirm or "Cancel" to exit without making changes.
  Through the context menu of the list (initially empty), you can manage individual items: add, edit, or delete them.
• Add reminder... Ctrl+N
• Edit reminder... F2
• Move reminder... Ctrl+F2
• Delete reminder... Del
• Additional reminder notes (submenu) with 3 items:
• Add... Ctrl+Shift+1
• Edit Ctrl+Shift+2
• Delete Ctrl+Shift+3
  If you add a note to a reminder, it will be saved in ReminderApp_config /ReminderApp_notes folder.
  Notes have a unique number in the file name, e.g. "Notes_xxxx.txt", the program is therefore able to find and manage them.
  Note: In the dialog, when adding an Anniversary or Birthday, you can also select a tune and play/stop it via a combo box and button.
  The melodies are stored in the Sounds, Samples, Melodies folder and are in .wav format.
  You can add more as long as they are of the same format and of short duration.
  If there are multiple anniversaries/birthdays on the same day, these will be grouped into a single notification, therefore the first melody on the list will be used.
  Continuing with the Edit menu:
• Delete past appointments... Ctrl+Shift+A
• Eliminate past medicines... Ctrl+Shift+M
• Address book... F4
  A dialog box will open for the options just described, follow the instructions on the screen.
• Set to current date Ctrl+Shift+H
  It will reset the date selector to the current date.

View Menu Submenu Alt+ v

In this third menu we will have the following options:

• See birthdays F5
• See appointments F6
• See recurring appointments Shift+F6
• See repeat reminder Ctrl+F6
• See anniversaries F7
• See medicines F8
• See recurring medicines Shift+F8
  Press Enter on the desired option to display it in a list.
  Press the applications key or shift+f10 to display the available options.
  Press Tab and then click the Close button or press the Escape or Enter key to close this dialog box and then return to the main program window.
  Note:
  When you create/edit a reminder, you will also notice 2 recurring types: (Recurring appointment and Recurring medicine)
  These two types of reminders can be set with recurrence: (Daily, Weekly, Yearly), depending on the week for Weekly, choice of day and choice of month will be activated for Yearly.
  You can set from 5 to 60 minutes, you will be notified in time and you will have the opportunity to, I don't know, change, get ready, and when the warning expires the real alarm will go off.
  Recurring reminders are smart, they move to the next equivalent date when they expire. For example, a recurring daily reminder, you will always find it the next day too, and so on.
  I haven't provided the ability to delete recurring reminders (for obvious reasons), but you can view them via the "View" menu.
  If you want to remove one, just activate Show the first "Date" column in the lists, excluding appointments and medications from the View menu.
  Next, select the type of recurring reminder you want to delete from the "View" menu and note its entry date, visible in the first column on the left.
  Finally, set this date in the main selector so you can see it and proceed with the deletion.
  Continuing with the View menu:
• Show the first "Date" column in displayed lists, (Excluding appointments and medications) (unchecked by default)
  Seeing these dates is useful for easily finding reminders to change or delete them by setting the date from the main selector.

Settings Menu Submenu Alt+ s

In this fourth menu we will have the following options:

• Set notifications Ctrl+Shift+N
  Press enter, a dialog box appears, move with "Tab" and "Shift+Tab" to move between controls, up and down arrows to change the parameter value.
  Number of repetitions: 3
Interval between repetitions (seconds): 8
Use alarm: Alarm 01
Working Folder: which shows the current path of the ReminderApp_config folder
  Change working folder
  Pressing this button will open a window titled Select the destination folder
  Select the new working path for the ReminderApp_config folder.
  Press the Export Folder button
  The new working folder path will be displayed in the dedicated field.
  Set default path
  Pressing this button, which always points to the default path of the ReminderApp_config folder in NVDA, will display the new working folder path in the dedicated field.
  Note:
  If you confirm with Ok, a window will ask how to proceed.
  You can choose to export the current configuration to the new path (a ReminderApp_config folder will be created if it doesn't exist, or it will be updated if it already exists).
  Choosing No instead will allow you to set only the new path without updating the existing folder.
  If everything goes well, a window will appear:
  Warning: Configuration successfully exported and created in: new path.
Enables reading of hours in 24-hour format
  This is a checkbox to choose whether to set the format to 24 hours or 12 hours, the default is 24 hours.
  Press the spacebar to set the 12-hour format.
  Enable date reading in European format
  This is a checkbox to choose to set the date format to US or European, the default is European.
  Press the spacebar to set the US format.
  This dialog also contains these checkboxes:
• Check for updates (selected by default)
  If this option is enabled, check for program updates at startup.
  Once the configuration is complete, press Enter or the "OK" button to validate the changes. To cancel the changes press Escape or the "Cancel" button.

Help Menu Submenu Alt+ h

In this fifth and final menu we will have the following options:

• Program information... F1
  When you press the submit button on this item, a dialog box opens showing program information in a reading document. Use the NVDA+b or Insert+b keys of the screen reader in the documentation to read this information again.
  Once done, press Tab and then click OK button or press Enter or Escape key to close this dialog box and then return to the main program window.
• User manual... Shift+F1
  When you press Enter on this item, a window will open displaying the program help in a read-only editing html document in the default browser in your respective language if available, otherwise you will receive a warning message.
  Press Alt+F4 to close it.
• Key shortcuts... F9
  When you press Enter on this item, a dialog box will open in which the program's keyboard shortcuts will be displayed in a read-only editing list, use the arrow keys to move through the list.
  Press Tab and then click the Close button or press the Escape or Enter key to close this dialog box and then return to the main program window.
• Check for updates... Ctrl+Shift+U
  When you press Enter on this item, you will be notified if there are updates for the program, if so, follow the instructions on the screen.

4.\ Additional information for the main window for the option "Reminder for the selected day:"

When you change the date in the main window selector, if the selected date matches a reminder, a sonar sound will sound.
However, the focus may shift to the list if a reminder has previously been selected.
To avoid this inconvenience, you can deselect the reminder before proceeding, or enter the date directly following the order day, month, year or month, day, year, depending on the system language settings (and not those of the program ).
In the selector you can navigate using the horizontal arrows.
It is important to note NVDA does not speak the current position in the selector. We recommend pressing a vertical arrow: NVDA will communicate the date you set and provide updates as soon as you type a full day, month, or year.
Sonar solves the problem of setting the initial date, instead of moving the focus to the list of reminders when there is one on that date, you hear the sound that notifies you and you can play with your date without problem :)

5.\ How does the Address book work?

Access to:
Edit Menu Submenu Alt+ e
then:
Address book... F4
When you press Enter on this option, a dialog box opens with the name:
Address book
This dialog box will contain the list of your contacts if you have added one, otherwise this list is empty.
When you open the context menu in this dialog box by pressing the applications key located next to the right control key on most keyboards. On a keyboard without an applications key, press shift+f10 instead.
Please note that some options are unavailable in the contact list depending on the context. You can press Enter on the option you want, so here are the options:

• Add contact... Ctrl+N
• Edit contact... F2
• Delete contact... Del
• Find contact... Ctrl+F3
  A dialog box will open for the menu options just described, follow the on-screen instructions.
• Find next F3
• Find previous Shift+F3
  Both of these options are based on the contact name you typed in the "Find contact" dialog box, so the search is performed with the next or previous match of the same name found in the address book list.
• Send email to contact... Ctrl+E
  A dialog box will open for this option, follow the on-screen instructions.

Please note that you can send an email to the contact if the contact's email has been entered in the edit field separated by a space at the beginning (and if necessary at the end), when editing the name of contact, for example. Otherwise, if there is no email in this edit box, this option will not be available to send it.

If you have not set a default email program, the system will automatically display a dialog box allowing you to select the application to use to send the email.

Thank you for reading this documentation!

I wish you good use of the program ReminderApp (Reminder) 😉
I would like to sincerely thank Rémy Ruiz for writing this documentation and translation of ReminderApp into French, English, Italian and Spanish and for his feedback and suggestions.